Revision date : 2022
Product Name |
Product Type | Manufacturer ID | Emergency Phone Number |
Address | Common Use of Product |
HS-ACC-P-HS | Coal Based Activated Carbon |
Hydrosil International Ltd. | 847-844-0680 | 125 Prairie Lake Rd. East Dundee, IL 60118 |
Filtration |
2.1 – Classification of the substance or mixture (GHS-US)
Pictogram | Signal Word | Hazard Statement |
Warning | Eye Irritation 2B H320; Acute Oral Tox 4, H302; Respiratory Irritation H335 |
2.2 – Precautionary statements (GHS-US) :
P261 – Avoid breathing dust/fume/gas/mist/vapours/spray
P264 – Wash … thoroughly after handling
P271 – Use only outdoors or in a well-ventilated area
P304+P340 – IF INHALED: Remove person to fresh air and keep comfortable for breathing
P305+P351+P338 – If in eyes: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing
P312 – Call a POISON CENTER/doctor/…/if you feel unwell
P337+P313 – If eye irritation persists: Get medical advice/attention
P403+P233 – Store in a well-ventilated place. Keep container tightly closed
P405 – Store locked up
P501 – Dispose of contents/container to …
2.3 – Other Hazards
No additional information available
2.4 – Unknown acute toxicity (GHS US)
No data available
Name | Product Identifier | Percent By Weight (%) |
Carbon | (CAS No.) 7440-44-0 | 85 |
Calcium Oxide | (CAS No.) 215-138-9 | 0.0-8.0 |
Magnesium Oxide | (CAS No.) 215-171-9 | 0.0-3.0 |
Iron Oxide | (CAS No.) 215-721-8 | 0.0-6.0 |
Potassium Carbonate | (CAS No.) 209-529-3 | 0.0-8.0 |
Aluminium Oxide | (CAS No.) 215-691-6 | 0.0-6.0 |
Silicon Oxide | (CAS No.) 234-368-0 | 0.0-12.0 |
Calcium Sulfate | (CAS No.) 231-900-3 | 0.0-5.0 |
4.1 – Description of first aid measures
Inhalation First Aid |
Remove person to fresh air. If not breathing, administer CPR or artificial respiration. Seek immediate medical attention. |
Skin Contact First Aid |
If skin reddening or irritation develops, seek medical attention. |
Eye Contact First Aid |
Immediately flush eyes with plenty of water for at least 15 minutes. If irritation persists seek medical attention. |
Ingestion First Aid |
If the material is swallowed, rinse mouth thoroughly. DO NOT induce vomiting unless directed to do so by medical personnel. Seek medical attention if large amounts are ingested. |
4.2 – Most important symptoms and effects, both acute and delayed
Symptoms/injuries after inhalation : May cause respiratory irritation.
Symptoms/injuries after skin contact : Causes skin irritation.
Symptoms/injuries after eye contact : Causes eye irritation.
Symptoms/injuries after ingestion : May be harmful if swallowed.
4.3 – Indication of any immediate medical attention and special treatment needed
No additional information available
5.1 – Extinguishing media
Suitable extinguishing media : Use extinguishing media appropriate for surrounding fire.
5.2 – Special hazards arising from the substance or mixture
Fire hazard : None known.
Explosion hazard : None known.
5.3 – Advice for firefighters
Protection during firefighting : Firefighters should wear full protective gear (chemical protective clothing and breathing apparatus).
6.1 – Personal precautions, protective equipment and emergency procedures
General measures : Avoid contact with the skin and the eyes.
For non-emergency personnel : No additional information available
For emergency responders : No additional information available
6.2 – Environmental precautions
None.
6.3 – Methods and material for containment and cleaning up
For containment : If possible, stop flow of product.
Methods for cleaning up : Shovel or sweep up and put in a closed container for disposal.
6.4 – Reference to other sections
Wet activated carbon depletes oxygen from air and, therefore, dangerously low levels of oxygen may be encountered. Whenever workers enter a vessel containing activated carbon, the vessels oxygen content should be determined and work procedures for potentially low oxygen areas should be followed.
Used or spend activated carbon may contain pollutants which require the material to be treated according to national law or local permits and which require the use of risk management measures when handling the materials.
7.1 – Precautions for safe handling
Avoid generation of dust.
7.2 – Conditions for safe storage, including any incompatibilities
Storage conditions : Protect containers from physical damage. Keep container tightly closed and store in dry, cool, well-ventilated area. Protect material from contaminated water and gases.
7.3 – Specific end use(s)
No additional information available
8.1 – Control parameters
No additional information available
8.2 – Exposure controls/Person Protection
Appropriate engineering controls : Local exhaust and general ventilation must be adequate to meet exposure standards.
Hand protection : Use impervious gloves to minimize skin contact.
Eye protection : Safety glasses.
Skin and body protection : Wear suitable working clothes.
Respiratory protection : If airborne concentrations are above the applicable exposure limits, use NIOSH approved respiratory protection.
9.1 – Information on basic physical and chemical properties
Physical state : Solid
Appearance : Pellets
Color : Black
Odor : No data available
Odor threshold : No data available
pH : 11-12
Relative evaporation rate (butylacetate=1) : No data available
Melting point : No data available
Freezing point : No data available
Boiling point : > 1,000°C
Flash point : > 1,000°C
Ignition temperature : 350-450°C
Decomposition temperature : No data available
Flammability (solid, gas) : No data available
Vapour pressure : No data available
Relative vapour density at 20 °C : No data available
Relative density : 28-31 lb/ft3
Solubility : No data available
Log Pow : No data available
Log Kow : No data available
Viscosity, kinematic : No data available
Viscosity, dynamic : No data available
Explosive properties : No data available
Oxidising properties : No data available
Explosive limits : No data available
10.1 – Reactivity
This product shows no reactivity under the specified conditions of storage, shipment, and use.
10.2 – Chemical stability
Stable under normal conditions.
10.3 – Possibility of hazardous reactions
Contact with strong oxiders, i.e. chlorine, liquid oxygen, permanganate, ozone, may result in rapid combustion/possible explosion.
10.4 – Conditions to avoid
None.
10.5 – Incompatible materials
Keep product away from strong oxidizers and strong acids.
10.6 – Hazardous decomposition products
Carbon monoxide may be generated in the event of fire.
11.1 – Information on toxicological effects
Acute toxicity : Not classified
Carbon (CAS No. 7440-44-0) | |
LD50 Oral Rat | > 1000 mg/kg |
Germ cell mutagenicity : Not classified
Carcinogenicity : Not classified
Zeolite (CAS No. 1318-02-1) IARC Group: 3
Reproductive toxicity : Not classified
Specific target organ toxicity (single exposure) : May cause respiratory irritation.
Specific target organ toxicity (repeated exposure) : Not classified
Aspiration hazard : Not classified
12.1 – Toxicity
No additional information available
12.2 – Persistence and degradability
No additional information available
12.3 – Bioaccumulative potential
No additional information available
12.4 – Mobility in soil
No additional information available
12.5 – Other adverse effects
No additional information available
13.1 – Waste treatment methods
Waste disposal recommendations : Dispose of contents/container in accordance with local/regional/national/international regulations.
In accordance with DOT / ADR / RID / ADNR / IMDG / ICAO / IATA
14.1 – UN number
Not applicable
14.2 – UN proper shipping name
Not applicable
All components of this product are listed, or excluded from listing, on the United States Environmental Protection Agency Toxic Substances
Control Act (TSCA) inventory.
15.1 – US Federal regulations
15.2 – US State regulations
Review specific state regulations.
Full text of H-phrases:
Eye Irrit. 2B | Serious eye damage/eye irritation Category 2B |
STOT SE 3 | Specific target organ toxicity (single exposure) Category 3 |
H335 | May cause respiratory irritation |
NFPA health hazard : 1 – Exposure could cause irritation but only minor residual injury even if no treatment is given.
NFPA fire hazard : 0 – Materials that will not burn
NFPA reactivity : 0 – Normally stable, even under fire exposure conditions, and are not reactive with water
Copyright 2022 Hydrosil International, LTD. License granted to make unlimited paper copies for internal use only. The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental requirements only. It should not therefore be construed as guaranteeing any specific property of the product. Hydrosil International LTD. makes no warranty, either expressed or implied, including any warranties of merchantability and fitness for a particular purpose.