HS-100

Molecular Sieve of Zeolite Safety Data Sheet | Revision date : 2022

 

Section 1

Identification of the substance/mixture and of the company/undertaking

---

1.1 Product and Company Identification

Product name:	Zeolite
Product number:	HS-100
Brand:	Hydrosil International Ltd.
CAS-No.	1318-02-1

1.2 Revelant identified uses of the substance or mixture and uses advised against

Identified uses:

• Laboratory chemicals
• Manufacture of substances

1.3 Details of the supplier of the safety data sheet

Hydrosil International LTD.

125 Prairie Lake Rd
East Dundee, IL 60118
Phone: 847-844-0680
Fax: 847-844-0799

1.4 Emergency telephone number

Phone: 847-844-0680

 

Section 2

Hazards Identification

---

2.1 Classification of the substance or mixture

2.2 GHS Label elements, including precautionary statements

Pictogram
Hazard statement(s)
H319	Causes serious eye irritation.
H335	May cause respiratory irritation.
Precautionary statement(s)
P261	Avoid breathing dust/ fume/ gas/ mist/ vapors/ spray.
P264	Wash skin thoroughly after handling.
P271	Use only outdoors or in a well-ventilated area.
P280	Wear protective gloves/ eye protection/ face protection.
P304 + P340	IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338	IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P312	Call a POISON CENTER or doctor/ physician if you feel unwell.
P337 + P313	If eye irritation persists: Get medical advice/ attention.
P403 + P233	Store in a well-ventilated place. Keep container tightly closed.
P405	Store locked up.
P501	Dispose of contents/ container to an approved waste disposal plant.

2.3 Hazards not otherwise classified (HNOC) or not covered by GHS
– none

 

Section 3

Compostion/Information on Ingredients

---

3.1    Substances

CAS-No.	1318-02-1
EC-No.	215-283-8

Hazardous Components

	Component	Classification	Concentration
	Zeolites crystalline alumiosilicates, composed of silica (SiO2) and alumina (Al2O3), in various proportions plus metallic oxides. Pr	Eye Irrit. 2A; STOT SE 3; H319, H335	<= 100 %

For the full text of the H-Statements mentioned in this Section, see Section 16.

 

Section 4

First Aid Measures

---

4.1 Description of first aid measures

• General advice-Consult a physician. Show this safety data sheet to the doctor in attendance. Move out of
  dangerous area.
• If Inhaled-If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
• In case of skin contact-Wash off with soap and plenty of water. Consult a physician.
• In case of eye contact-Flush eyes with water as a precaution.
• If swallowed-Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a
  physician.

 

4.2 Most important symptoms and effects, both acute and delayed-
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11

4.3 Indication of any immediate medical attention and special treatment needed -No data available

 

Section 5

Firefighting Measures

---

5.1 Extinguishing media, Suitable extinguishing media-Use water spray, alcohol-resistant foam, dry
chemical or carbon dioxide.

5.2 Special hazards arising from the substance or mixture-Nature of decomposition products not known.

5.3 Advice for firefighters-Wear self-contained breathing apparatus for firefighting if necessary.

5.4 Further information-No data available

 

Section 6

Accidental Release Measures

---

6.1 Personal precautions, protective equipment and emergency procedures- Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas. Provide adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust.For personal protection see section 8.

6.2 Environmental precautions-Do not let product enter drains.

6.3 Methods and materials for containment and cleaning up- Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed containers for disposal.

6.4 Reference to other sections- For disposal see section 13.

 

Section 7

Handling and Storage

---

7.1 Precautions for safe handling-Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Provide appropriate exhaust ventilation at places where dust is formed.Normal measures for preventive fire protection. For precautions see section 2.2.

7.2 Conditions for safe storage, including any incompatibilities- Keep container tightly closed in a dry and well-ventilated place.

7.3 Specific end use(s)- Apart from the uses mentioned in section 1.2 no other specific uses are stipulated

 

Section 8

Exposure Controls/Personal Protection

---

8.1 Control parameters – Components with workplace control parameters

Component	CAS-No.	Value	Control parameters	Basis	Remarks
Zeolites crystalline alumiosilicates, composed of silica (SiO2) and alumina (Al2O3), in various proportions plus metallic oxides.	1318-02-1	TWA	1.000000mg/m3	USA. ACGIH Threshold Limit Values (TLV)	Lower Respiratory Tract Irritation Pneumoconiosis Neurotoxicity Not classifiable as a human carcinogen varies

8.2 – Exposure controls

• Appropriate engineering controls- Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.
• Personal protective equipment
• Eye/face protection-Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
• Skin protection – Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove’s outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.
  If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the CE approved gloves. This recommendation is advisory only and must be evaluated by an industrial hygienist and safety officer familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario.
• Body Protection – Impervious clothing, the type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
• Respiratory protection – For nuisance exposures use type P95 (US) or type P1 (EU EN 143) particle respirator. For higher level protection use type OV/AG/P99 (US) or type ABEK-P2 (EU EN 143) respirator cartridges. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
• Control of environmental exposure – Do not let product enter drains.

 

Section 9

Physical and Chemical Properties

---

9.1 Information on basic physical and chemical properties